Home / Products

Products

Vinyl flooring in Singapore, plus the underlay and trims to finish it. Ask us about samples.

Honey Oak YN809 Rèn vinyl flooring in a living room
Rèn

Rèn

Next-Generation Composite Flooring

Strength that bends.

Every composite floor is made of two things: PVC resin, which holds everything together, and calcite powder, which gives it rigidity. Cheap floors use too much stone and too little resin, sometimes recycled scrap, so the plank ends up hard but brittle. That’s why old floors snap.

FluidCore™ is our formula: 100% virgin resin, resin-rich, with no recycled regrind. The resin holds the stone, so the plank flexes before it breaks, and its rigid click joint keeps its shape in Singapore heat. Rèn is still a rigid floor; “fluid” is about how the core behaves under stress.

韧 is written with leather beside a blade. Leather bends without breaking; a blade is hard and holds its edge. Rèn is both.

Three Rèn builds, each for a different job

Same FluidCore™ recipe, same waterproof click-lock planks. What changes is where they belong.

Buttered Oak YN816 Rèn 5.0mm flooring in a home dining area

5.0mm

~$1.55 /sqft

For homes and lower footfall areas

Our go-to for most: HDB, condo and landed. Even offices with lower footfall. 

Available in 6 colours

Ivory Oak YN801, Rèn 5.0mm vinyl flooring
Ivory OakYN801
Natural Beige YN802, Rèn 5.0mm vinyl flooring
Natural BeigeYN802
Blonde Oak YN808, Rèn 5.0mm vinyl flooring
Blonde OakYN808
Honey Oak YN809, Rèn 5.0mm vinyl flooring
Honey OakYN809
Soft Willow YN810, Rèn 5.0mm vinyl flooring
Soft WillowYN810
Buttered Oak YN816, Rèn 5.0mm vinyl flooring
Buttered OakYN816
Natural Beige YN802 Usage in Living Room

6.0mm

~$1.90 /sqft

For areas with a higher footfall

Suits homes and commercial spaces, recommended for higher-footfall areas.

Available in 2 colours

Honey Oak YN809, Rèn 6.0mm flooring
Honey OakYN809
Natural Beige YN802, Rèn 6.0mm flooring
Natural BeigeYN802
Ivory Oak YN801 Rèn 6.5mm acoustic flooring

6.5mm

~$1.80 ~$1.60 /sqft · Promotional price

Recommended for HDBs and condos

The only build with an acoustic layer: 2mm IXPE foam, bonded on, to cut impact noise. Best for HDBs, condos, upper floors, bedrooms and noise-conscious homes. 6.5mm is on a promotional price because we’re clearing our current 6.5mm stock in Singapore. There’s no end date, but stock is limited, so it’s available while stock lasts.

Available in 2 colours

Ivory Oak YN801, Rèn 6.5mm acoustic vinyl flooring
Ivory OakYN801
Honey Oak YN809, Rèn 6.5mm acoustic vinyl flooring
Honey OakYN809
Prices are approximate supply prices per sqft. Installation is quoted separately by your installer. Screens change how colour looks, so please see a real sample before you choose. Ask us about samples. For project quantities, message us for pricing.

Underlay & finishing

What goes under your floor and around its edges.

IXPE foam underlay roll for click-lock vinyl flooring

IXPE foam underlay

from ~$15 - $85/roll (about 322 sqft)

Underlay layer

A closed-cell foam layer that goes under click-lock vinyl. It acts as a moisture barrier from the subfloor and reduces impact noise.

Available in 3 thicknesses

PVC skirting boards in Enoch flooring finishes

Skirting boards

$5.00 /strip (2.4m long)

Wall edge finish

Moisture-resistant PVC skirting that sits where the wall meets the floor, hiding uneven edges. Made in the same finishes as our flooring, so it matches.

Available in 6 finishes

enoch-transition strip

Transition strips

$5.00 /strip (2.4m long)

Doorways & floor edges

PVC strips for where your floor ends or meets another surface, in 6 finishes matching our flooring colours.

Available in 3 profiles

Which build is right for me?

Three quick questions. If you’re still unsure, send us a photo of the space and we’ll tell you what we’d pick.

  1. Is it an HDB flat, condo or landed home?Start with 5.0mm. It suits most homes and comes in 6 colours.
  2. Is it an upper floor or a bedroom, or are you worried about noise?Go for 6.5mm. It’s the only build with the 2mm IXPE acoustic layer.
  3. Is it a high-footfall area, at home or at work?Go for 6.0mm. Suits homes and commercial spaces, and is recommended for higher-footfall areas.

Waterproof

Spills, mopping and Singapore humidity are fine. Every Rèn build is waterproof.

Click-lock installation

The planks click together with no wet works and no curing time. We can introduce an independent approved installer.

SGS-tested

Tested by SGS for durability and performance, and for chemical safety (phthalates, VCM, heavy metals and VOCs). Full reports are available on request.

Goes over existing tiles

No hacking needed when your tiles are flat, firmly bonded and not cracked.

How much flooring do you need?

Our space calculator gives you a quick estimate. Then tell us a bit about the space and we’ll help with the rest.

Vinyl flooring questions

Anything else? Ask us on WhatsApp

Rèn (韧) is our collection of next-generation composite flooring. Its FluidCore™ base is virgin PVC and calcite, and our spec sheets state that plainly. If you know this kind of floor by an older category name, you’re right, it’s the same family. The difference is the recipe: resin-rich and 100% virgin, so it flexes before it breaks.

Yes. Rèn is rigid SPC vinyl flooring with a calcite core, made better with our FluidCore™ base. It’s the same rigid-core family of PVC and calcite that many people know as SPC. The difference is our FluidCore™ base: 100% virgin resin, resin-rich, with no recycled regrind. That’s why we call it next-generation composite flooring.

For most homes, start with 5.0mm. 6.5mm is also a good pick for HDB flats and condos. If it’s an upper floor or bedrooms and you’re conscious of noise, 6.5mm is the one with the 2mm IXPE layer. 

Yes, ask us about samples. You’re also welcome to visit our showroom at 8 @ TradeHub 21 by appointment. Just message us to set a time.

Yes. Every Rèn build is waterproof, so spills, everyday mopping and Singapore humidity are fine, including in the kitchen. Just avoid heavy washing, and areas that stay wet such as bathrooms and showers.

Yes. Every Rèn build can be laid directly over existing tiles, as long as they’re flat, firmly bonded and not cracked, so there’s no hacking and less mess and noise. Not sure about your floor? Send us a photo and we’ll tell you.

No. Our prices are for supply. We can introduce an independent approved installer, and you agree the installation scope and price directly with them. Let us know if you need assistance with this!

Finding us

Come and walk on it

8 @ TradeHub 21
8 Boon Lay Way, #11-15
Singapore 609964

Visits are by appointment. Message us first and we’ll set a time that works.

Enoch Surfaces logo

SHOWROOM

8 @ TradeHub 21,
8 Boon Lay Way, #11-15
Singapore 609964
(by appointment only)

CONTACT

CONNECT